1.  Sturdy and stable design
2.  User friendly “soft touch” LED membrane control panel
3.  Pneumatic clamps provided for magazine alignment
4.  Pneumatic pusher’s pressure regulated
5.  High throughput with short magazine change-over time
6.  SMEMA compatible

Hitachi FS-1000Ⅲ


1.    高精度和高分辨率

2.    高速批量檢查

3.    各種分析軟件不斷深化多樣

4.    可操作性強,安全性高

Nordson March Sphere(WR)


1.  Dual cassette load station to minimize idle time.
2.  Multi-sizes capable aligner with minimal hardware change-over required.
3.  Robust robotic wafer engine.
4.  Integrated wafer recognition for high reliability wafer handling.
5.  Compact design minimize floor space.
6.  Unique kits allow fast change-over between wafer sizes and supports multi-load for smaller wafer sizes.
7.  Highly uniform treatment and fast throughput.

Nordson March AP1000


1.  PLC controller with touch screen provides an intuitive graphical interface and real time process representation.
2.  Flexible shelf architecture allows processing of a wide variety of part carriers in either direct or downstream plasma mode.
3.  The 13.56 MHz power supply has automatic impedance matching for unparalleled process reproducibility.
4.  Proprietary software control system generates process and production data for statistical process Control.

Nordson March AP300/AP600


1.  Touch screen control and graphical user interface give real-time process information
2.  Flexible shelf architecture allows process of a wide variety of piece parts, components or carriers 
3.  13.56MHzRF generator with automatic matching network delivers excellent process repeatability.
4.  Convenient facility hook-ups for periodic calibration requirement used in validation process.

Nordson March Flextrak-CD


1.  Highly uniform plasma with fast treatment rates
2.  Production-ready strip handling system
3.  Easy-to-use touch screen graphical user interface (GUI)
4.  Service components accessible via front pull-out shelves
5.  High throughput, small footprint, low cost of ownership

Nordson March Fastrak


1.  Flexible configuration accommodates the full range of strip dimensions and magazine designs
2.  Advanced robotic handling system minimizes strip handling, pushing, pulling and reduces operator intervention 
3.  New camera-based material tracking provides 100% plasma treatment validation 
4.  High-efficiency, application specific, plasma chamber design offers Direct or Ion Free plasma treatment modes 
5.  Significantly smaller system footprint and magazine reuse capability save space and help lower cost of ownership

Nordson DAGE Ruby X 射線檢測機


1.    適用于免維護密封傳送型DAGE-NT-500X射線管,最高160KV管電壓及 10W標靶功率
2.    特征分辨率<0.5um (500nm), 可選配UCT(3D 檢測), X-Plane ?和加配顯 示器
3.    使用Nordson DAGE 200 萬像素@ 25fps的CMOS 平板探測器可實現實時 模式影像增強功能且使用壽命較長
4.    內置(X 射線圖像穩定器)防震動控制處理系統
5.    2500倍幾何放大倍率,5200倍系統放大倍率, 共計15600倍數字變焦倍率
6.    保持放大倍率不變的情況下最大可達到70°傾斜角
7.    最大樣品尺寸 :29” x 22.8” (736 x 580mm),47” x 26”的電路板尺寸也可供選擇。

Nordson DAGE Diamond X 射線檢測機


1.    適用于免維護密封傳送型DAGE NT-100X射線管,最高160KV管電壓及10W標靶功率
2.    特征分辨率<0.1um并可選配uCT (3D 檢測)& X-Plane ?功能
3.    使用Nordson DAGE 300 萬像素@ 25fps的CMOS 平板探測器可實現實時模式影像增強功能且使用壽命較長
4.    內置(X 射線圖像穩定器)防震動控制處理系統和24” 主顯&加配TFT-LED 顯示器
5.    2500倍幾何放大倍率,7100倍系統放大倍率, 共計35000倍數字變焦倍率
6.    保持放大倍率不變的情況下最大可達到70°傾斜角
7.    最大樣品尺寸 :29” x 22.8” (736 x 580mm)

Nordson DAGE JadeFP X 射線檢測機


1.    適用于DAGE VR950 開發,透射式X光管,最高160KV管電壓及3W標靶功率
2.    特征分辨率<0.95 (950nm)
3.    使用Nordson DAGE 133 萬像素@ 10fps的CMOS 平板探測器可實現實時模式影像增強功能且使用壽命較長
4.    內置(X 射線圖像穩定器)防震動控制處理系統
5.    1400倍幾何放大倍率,4200倍系統放大倍率
6.    保持放大倍率不變的情況下最大可達到65°傾斜角
7.    最大樣品尺寸 :29” x 22.8” (736 x 580mm)  

Nordson DAGE 4000


1.    Dage4000推拉力測試系統用于半導體或光電,電路板組裝業。適用于所有的 Pull拉力和 Shear 推力測試,可達到高精度,高重復性,高再現性。 
2.    搖桿操作,簡便易學; 
3.    馬達驅動 X,Y 工作臺; 
4.    適用于半導體各種封裝形式測試金鋁線黏合力;及COB封裝、光電,LED,SMT組裝 , 原件與基板黏合測試。

Nordson DAGE 4000plus


1.  High versatile

2.  Switch applications in just seconds

3.  Increased efficiency

4.  Ultimate step back accuracy

5.  Ultimate correlation

6.  Intelligent software

Nordson DAGE 4000 Optima

4000 Optima

1.  Fastest and most accurate bond tester

2.  Ultimate speed and flexibility

3.  Extensive application capability

TTVision F220


1.  High Speed Inspection Head for Higher Throughput

2.  Lower Cost $ per unit LED

3.  Faster Return-of-Investment (ROI)

4.  Multi Wires on Multi Dice Inspection for more device configuration

5.  Foreign Material Inspection (Optional)

6.  Simplified Angle View Setup

7.  Simplified Recipe Setup

8.  Reinforced Machine Base for Lower Vibration



1.    高解析度CCD圖像掃描系統,有進行料片位子校正和辨認入料方向等功能。

2.    拼圖技術智慧型掃描功能 – 可排除缺料點膠和解決后段設備卡料等問題。

3.    點膠閥體配搭膠針位置校正、清膠、監視等功能,操控人性化。

4.    諾配搭NSW 特制精密、高速點膠閥PP2D,可實現翻倍的實際產能。

5.    多功能點膠模式 - 提高 LED 封裝可靠性、性能和材料利用率。

6.    Ndisp3 軟體操控界面,性能現代化且適用于多類產品變化性生產。

7.    機身體積較小而且節省車間占據空間,發揮“空間小用意大”的作用。



1.   Multiple Magazine Loader (3~6 Magazines)

2.   Automatic Strip Width Conversion (Single & Matrix Boat)

3.   Mechanical Pre-alignment by Precise Jig 

4.   X- Y -Z Position Control By Servo Motor

5.   Flux Squeegee & Pin Dotting Fluxing

6.   5 Vision Inspection System

(1) PCB PRS Vision (1.4M CCD)

(2) Auto Set-Up (1.4M CCD)

(3) Ball Volume Detect Vision (1.4M CCD)

(4) Ball Tool Inspection Vision (8M CCD) 

(5) Ball Quality Inspection Vision (8M CCD)

SSP Cover


1.    Boat Gripper & Step Motorized Feeding System.

2.    Strip & Cover Plate Picker Gripper & Vacuum Picker.

3.    Automatic Magazine and Strip Width Conversion for Reduction of Set up time (62mm ù74mm).

4.    ID Inspection Vision System for Good/Reject Unit Count & Orientation Detect function.



1.  Minimum conversion between devices & carrier tape widths

2.  Handles micro devices down to 0.6x0.3mm

3.  Non-contact device alignment

4.  Vision guided PnP

5.  Multiple operation modes

Jin Bun自動光學檢測


1.    客制化:滿足客戶個別需求,量身訂做特殊功能

2.    高解析度:可判別微少不良

3.    共用性高:搭載變倍鏡頭,更換晶片規格只需調整倍率,不需更換鏡頭

4.    圖像存儲:可存儲存各站正、反面NG及OK最近檢測各200筆圖像

5.    圖像顯示:運行可即時顯示各站良品或不良品圖像

6.    自訂分類:可自由設定不良名稱及吹氣分類,方便管理。

7.    SSD硬碟:利用先進電腦硬體,快速開機,減少等待時間

8.    人性介面:容易操作使用。

9.    高定位精度:采用超高解析度ENCODER,不誤判混料,不洗盤

10.    生產統計顯示:可即時顯示各站各項不良統計值。